H31-341_V2.5 is the new exam version for HCIP-Transmission V2.5 Certification. The latest HCIP-Transmission V2.5 Certification H31-341_V2.5 dumps have been newly released by Passcert team, who have years of experience in the field and are dedicated to helping you study the latest exam objectives and pass your exam with ease. These HCIP-Transmission V2.5 Certification H31-341_V2.5 dump cover all the topics and skills needed to pass the certification exam and are regularly updated to ensure the latest information is included. With the help of these HCIP-Transmission V2.5 Certification H31-341_V2.5 dumps, you can prepare for the exam and pass it confidently.

After passing the HCIP-Transmission V2.5 certification, you will master the principles, scheduling schemes, commissioning methods of transport network devices, service configuration, protection implementation mechanisms, and troubleshooting methods of transport network devices and transport network faults. In addition, you can perform O&M and troubleshooting based on this, and is qualified as a high-level O&M engineer for transport networks.

The HCIP-Transmission V2.5 exam covers advanced knowledge of tranmission network field, including WDM Principles, Transmission Network Products, NG WDM Equipment Networking and Applications,  Optical- and Electrical-Layer Grooming Solutions of NG WDM Equipment, NG WDM Equipment Commissioning, MS-OTN Features, OTN Protocol, MS-OTN Protection Principles, NG WDM Equipment Routine Maintenance, NG WDM Alarm Signal Flow Analysis, NG WDM System Troubleshooting.

System Overview

WDM Transmission Media

Key Technologies of WDM

Product Overview

Cabinets and Subracks

Boards

Network Layers and System Architecture

Site Types

Basic Networking Elements

Optical-Layer Grooming Solutions of NG WDM Equipment

Electrical-Layer Grooming Solutions of NG WDM Equipment

NG WDM Equipment Commissioning Basics

NG WDM Equipment Commissioning Process and Procedure

IP Basics

MPLS & PWE3

Packet Services

Maintenance Features

OTN Overview

OTN Interface Structures and Multiplexing/Mapping Principles

OTN Frame Structure

Frame Structure and Meaning of OTN Electrical-Layer Overheads

Evolution to Liquid OTN

Device-Level Protection

Network-Level Protection (OTN)

Network-Level Protection (Packet)

Device Routine Maintenance

NMS Routine Maintenance

Overview

Electrical-layer Alarm Analysis

Optical-layer Alarm Analysis

Device Routine Maintenance Troubleshooting Preparations

Fault Locating Ideas and Methods

Troubleshooting by Fault Type

Case Analysis

1. There are many factors affecting the transmission distance in the NG WDM system, which of the following will not affect the transmission distance?

A. Optical line dispersion

B. OSC independent monitoring channel

C. Optical line loss

D. Fiber nonlinear effects

Answer: B

2. Which of the following options can reduce the impact caused by nonlinear effects in the WDM system? (Multiple choice)

A. Use high-performance fiber

B. Control the optical power

C. Dispersion management

D. Advanced light source technology

Answer: BCD

3. In the WDM transmission system, which main factors that affect the unevenness of the power balance of each channel not include? (Multiple choice)

A. The non-uniformity of the insertion loss of each channel of the multiplexer/demultiplexer

B. The main channel adjustable optical attenuator setting is unreasonable

C. High attenuation of optical cable

D. EDFA gain unevenness

Answer: ABD

4. What are the failure analysis methods of NG WDM system? (Multiple choice)

A. RMON performance analysis

B. Loopback method

C. Signal flow analysis method

D. Replacement method

Answer: BCD

5. What are the ways for NG WDM equipment to create optical fibers? (Multiple choice)

A. Search method

B. Graphical way

C. Synchronization method

D. Form method

Answer: ABD

6. Which of the following protection methods belong to NG WDM optical layer protection? (Multiple choice)

A. Client side 1+1 protection

B. Optical line protection

C. ODUk SNCP protection

D. 1+1 protection in the board

Answer: ABD

7. What types of E-Line services are supported by MS-OTN packet equipment?

A. VLAN-based E-Line service

B. E-Line service based on QinQ

C. E-Line carried by PW

D. E-Line service for point-to-point transparent transmission

Answer: ABCD

8. Which of the following descriptions about the connection of NG WDM equipment to the network management computer is wrong?

A. The network management computer can be connected directly or through a local area network, depending on the situation

B. If the connection mode of the subrack is the master-slave mode, the network management computer must be connected to the main subrack.

C. The IP addresses of all network elements must be in the same address segment as the IP address of the network management computer.

D. Only the gateway NE needs to be connected to the network management computer.

Answer: C